I would buy a PUX flag, banner, or bumper sticker

[Red Barchetta]

Dean -
I didn't want to post this in "General" & get a silly heated debate going about PUX flag's as I think the idea of your 3 "official" traveling PUX flags/books are a great idea ().

However, we only boondock where we obviously don't see any PUX'ers as well as dry camp at cg's where we have never run into a fellow PUX'er.
I don't often advertise when we'll be away from home except for a few trips a year.
We camp quite a bit - average of every 5-6 weeks year 'round - and I being a chatty kind of guy () talk (or at least say hello) to almost every PU owner I see when at a cg.  At least once a trip I am explaining the PUG's, BAL Leveler, Ladder Golf, dual LP tank switch-over tee, & other outside PU items/gadgets/mod's. to a victim, er interested PU owner.
Of course if I haven't freaked them out by then () I get around to mentioning PUX and they say something like; "I never even thought to look online for a PU forum for help & idea's" so I tell them the link and neither of us have a pen & paper nearby of course so they end up forgetting it.

Sure would love to have a PUX (with web address) flag, banner, or a-bit-larger-than-regular-size bumper sticker to set in the front bunk's window screen when folks walk by the PU.

I have a PUX hitch cover (which I don't see in the PUX store anymore btw), but of course that's in the back of the TV when the draw bar is in place.

Any plans to sell anything like that?

If not, no worries, but thought I'd ask.  

Again, these would be personally owned & completely apart from the 3 "official" traveling PUX flags/books.

edit - And no offense intended, but the current bumper stickers with the corny/cute sayings aren't our cup of tea.


Jeff
'02 Coleman Utah CP

"Get busy living, ..."
Red Barchetta’s site

[mgwerks]

Sign me up for a flag also if they are produced again. . Mark '78 N5HII and Kathy DW/XYL . '98 Jayco Eagle 12SO F-35 PowerStrokeJayco/Viking lift documentsJayco Lift System diagram set and L&W Lift System diagram set Click here for lochsa's great Jayco/L&W lift system pictures!"It does not take many words to speak the truth."

-- Inmuttooyahlatlat

[ScubaD]

I will order one alsoScubaD David69 Vickie7 Lauria92[tv-ford] 22 F15 SuperCrew[popblue] 22 Coleman Laramiehttp://www.gallery.pstartech.com/gallery2/main.php?g2_itemId=2272

[MichelleOH]

I've been wanting a flag for two years.  I'll buy one.'96 Jayco 127

[Red Barchetta]

Well, there's at least 4 of us that would fly/hang a PUX flag/banner/etc... from our PU's.Terrific positive (& cheap (in fact, we'd be paying you  )) advertising opportunity Dean.  [:)]Jeff'2 Coleman Utah CP[popgreen]"Get busy living, ..."Red Barchetta’s site

[Huntin4Pixels]

Count me in on the flags for purchase idea. I would like to see a flag with grommets for my flag pole. But any flag or banner that Jeff described above would be great. I have the decal that people ask me about.Don <><     26 F-15 FX4 4X4 5.4L SuperCrew 27 Tundra SR5 4X4 5.7L Double Cab[popgrey] 27 Fleetwood Evolution E-1 and[tt-k] as soon as my AIRSTREAM hitch SEED sprouts. I will pick it before it gets too big Sometimes I do get to places just when God's ready to have somebody click the shutter - Ansel Adams

[TooManyTents]

Me too.  I have a receiver cover, but that doesn't help when I'm camping and really want to show off.Dave - 23.5 Coleman Utah

[Red Barchetta]

quote:Originally posted by TooManyTentsMe too.  I have a receiver cover, but that doesn't help when I'm camping and really want to show off.

See, we're like proud PUX peacock's that want to strut our stuff around the cg (when we're camping at an actual cg that is).  [8D]6 confirmed orders so far Dean.  [;)]Jeff'2 Coleman Utah CP[popgreen]"Get busy living, ..."Red Barchetta’s site

[teachmiami]

Count me in.  I'd order one too.Me: Dan 1965 (From Maine)DW: 1966 DD: 1988 "Camping? No thanks."DS: 1999DS: 25[popblue]28 Williamsburg[van-b]24[tv-dodge]Grand Caravanmy camping pics

[dupreet]

Hi,Put me on the waiting list too.Thanks!Todd

[neonhomer]

Add me to the list..... I will take one. Would be cool to fly one while camping at reenactments and such.I even have an idea for a flagpole.... they make a foot that you put under a tire, and then put a flag pole in it. Well, there is enough room on the plate to drill some holes.  Drill 3 or 4 holes in the plate. Then weld 3 or 4 bolts to the frame. Then you just put the plate up to the frame, and secure with wing nuts.Now I have to figure out how to secure it to the roof. Something that won't have bolts sticking out of the side of the roof while the roof is down. Maybe a plate on top of the roof, with a hoop. During setup, before cranking the roof up, you put the pole in the hoop and base. (Install the base first.) Secure to the base with a wingnut. Then start cranking the roof. The upper hoop will slide up the pole as you lift. The key is to make the upper hoop loose enough to slide, but not loose enough to have the pole rattling while raised.Then when you lower the roof, the same thing happens. The roof hoop slides down the pole.

Keeping Old Colemans Alive

"What we've got here is... failure to communicate..." - Strother Martin, Cool Hand LukeNeonHomer's "Camp Driveway"NeonHomer's Roof Rebuild Thread (in PDF format - Thanks to Dean.)Coleman  Lift System ManualNeonHomer - Kevin `77   DW Teresa - `8 [st-OH]DS Michael - `2   DS Steven - `4 `81 Coleman Shenandoah - Coupler swap is DONE!!![tv-chevrolet] '4 Chevy Silverado 15 5.3/4spd - New TV!!!!!![tv-dodge] `94 Dodge Caravan  3.L 4spd - I got one of the gaskets done!

[Microvoltz]

Dean, Create a flag that has all three of your sites on it (PUX, HUX, RV Itch), and I will purchase one.Also....... Can you get "business" cards made up with all three symbols and the web address printed? If so, I will place an order for 5 cards.Ron[st-IL]24 Fleetwood Redwood26 Fleetwood Orbit 24xps 1997 Suburban1 Wife of 23 years3 DK'sandKimmey the 4 legged kidRemember: You can never make anything idiot proof, you will always find a bigger idiot.

[Huntin4Pixels]

neonhomer,I use this stainless steel Rail Mount Flag Pole Socket by Taylor Made on one of my roof rack bars. Fits the 1 1/8" Yakima bar perfectly and a flag pole up to a 1" diameter can be used. They are also made to fit 7/8" to 1 1/4" bars/rails. Socket #974 fits the Yakima bars. Prior to raising the roof I put my flag pole in and up it goes. You can get them at most marine supply stores if interested.Don <><

[Red Barchetta]

Dean -1 orders in 9 days so far.  [:)]Seems like a good idea for us & you.  [;)]Red BarchettamgwerksScubaDMichelleOHHuntin4PixelsTooManyTentsteachmiamidupreetneonhomerMicrovoltzJeff'2 Coleman Utah CP[popgreen]"Get busy living, ..."Red Barchetta’s site

[neonhomer]

quote:Originally posted by Huntin4Pixels
neonhomer,I use this stainless steel Rail Mount Flag Pole Socket by Taylor Made on one of my roof rack bars. Fits the 1 1/8" Yakima bar perfectly and a flag pole up to a 1" diameter can be used. They are also made to fit 7/8" to 1 1/4" bars/rails. Socket #974 fits the Yakima bars. Prior to raising the roof I put my flag pole in and up it goes. You can get them at most marine supply stores if interested.

Only problem is I don't have a roof rack on my 81 Coleman. I was outside looking today, and thought about taking a piece of Unistrut and bolting that to the side of the roof. Then I would have a place to mount the U-bolt/upper hoop.I'll figure something out. Worst case scenario, I will just use the "park on" footplate and reduce the pole size. (Was thinking of a pole that would be about 12-15' high.)

Keeping Old Colemans Alive

"What we've got here is... failure to communicate..." - Strother Martin, Cool Hand LukeNeonHomer's "Camp Driveway"NeonHomer's Roof Rebuild Thread (in PDF format - Thanks to Dean.)Coleman  Lift System ManualNeonHomer - Kevin `77   DW Teresa - `8 [st-OH]DS Michael - `2   DS Steven - `4 `81 Coleman Shenandoah - Coupler swap is DONE!!![tv-chevrolet] '4 Chevy Silverado 15 5.3/4spd - New TV!!!!!![tv-dodge] `94 Dodge Caravan  3.L 4spd - I got one of the gaskets done!